Miele H 4430 Pyrolytic User Manual

Stainless steel fronted
appliances
The appliance front and controls are
susceptible to scratches and abrasion.
Please observe the cleaning
instructions for
–
stainless steel surfaces,
–
stainless steel coloured controls.
Stainless steel surfaces
Stainless steel surfaces can be cleaned
using a Miele E-Cloth or with a
proprietary non-abrasive cleaning
agent designed specifically for use on
stainless steel. N.B. Do not use
stainless steel cleaning agents on the
controls.
Avoid:
– cleaning agents containing soda,
acids or chlorides,
– abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners,
–
abrasive sponges, e.g. pot scourers
or sponges which have been
previously used with abrasive
cleaning agents.
To help prevent re-soiling, a proprietary
conditioning agent for stainless steel
can also be used.
Apply sparingly with an even pressure
following the direction of the grain.
Stainless steel coloured controls
The controls may suffer
discolouration or damage if soiling is
left on them for too long. Remove
soiling straight away.
Avoid:
–
cleaning agents containing soda,
acids or chlorides,
–
abrasive cleaning agents, e.g.
powder cleaners and cream
cleaners,
– abrasive sponges, e.g. pot scourers
or sponges which have been
previously used with abrasive
cleaning agents,
– stainless steel cleaners,
– oven sprays.
Cleaning and care
60

Miele H 4430 Pyrolytic Specifications

General

Brand	Miele
Model	H 4430 Pyrolytic
Category	Oven
Language	English