Miele H 7860 BP User Manual

Cleaning and care
99
 Place the container back in the oven,
insert the plastic tube, secure it to the
container and close the door.
 Confirm with OK.
The intake process for the first rinse
will start.
Water will be flushed through the steam
injection system and will then collect in
the universal tray.
Messages will appear in the display to
prepare for the second rinse.
 Take the universal tray out of the oven
and empty it. Place the tray back in
the oven again on the top shelf level.
 Remove the plastic tube from the
container. Fill it with approx. 1litre of
fresh tap water.
 Place the container back in the oven,
insert the plastic tube and secure it to
the container.
 Confirm with OK.
 Do the same for the third rinse.
Leave the universal tray (with the water
which has collected in it from the third
rinse) on the top oven shelf while the
evaporation process takes place.
Evaporating residual moisture
After the third rinse residual moisture
evaporation will begin.
 Remove the container and tube from
the oven.
 Close the door.
 Confirm with OK.
 Danger of injury caused by
steam.
Steam can cause severe scalding.
Do not open the door while the
residual moisture is being
evaporated.
The oven heating will switch on and the
duration of the evaporation process will
count down in the display.
During the evaporation process, the
duration may be adjusted by the system
according to how much water is
currently present.
Finalising the descaling process
At the end of the evaporation process a
message will appear in the display with
advice on cleaning after running the
descaling programme.
 Confirm with OK.
A buzzer sounds and Finished appears.
 Select Close.
 Switch the oven off with theOn/Off
 sensor.
 Risk of injury caused by hot
surfaces.
The oven gets hot during operation.
You could burn yourself on the
heating elements, the oven
compartment, or accessories.
Allow the heating elements, oven
compartment and the accessories to
cool before manual cleaning.
 Remove the universal tray with the
collected liquid and empty it.
 When the oven compartment has
cooled down, clean away any
condensation and descaling agent
residues.
 Leave the oven door open until the
oven interior is completely dry.

Miele H 7860 BP Specifications

General

Current	10 A
Connected load	3700 W
AC input voltage	400 V
AC input frequency	50 Hz
Energy efficiency scale	A+++ to D
Energy efficiency index (EEI)	81.7
Energy consumption (conventional)	1.1 kWh
Energy consumption (forced convection)	0.71 kWh
Oven size	Large
Oven type	Electric
Cleaning type	Pyrolytic
Number of ovens	1
Total oven power	- W
Convection cooking	Yes
Full surface grill	-
Oven thermostat range	30 - 300 °C
Number of shelf positions	5
Total oven(s) interior capacity	76 L
Door hinge	down
Control type	Touch
Door material	Glass
Product color	Stainless steel
Control position	Top front
Appliance placement	Built-in
Timer type	Digital
Timer modes	Cooking time, End cooking time

Weight and Dimensions

Depth	569 mm
Height	596 mm
Weight	47000 g
Installation compartment depth	550 mm
Installation compartment width	568 mm
Installation compartment height	595 mm
Installation compartment width (min)	560 mm
Installation compartment height (min)	593 mm