Miele H 818 - Removing Shell Supports, Side Panels, Back Panels

Cleaning and care
To remove the runners, the side, and - Undo the screws in the hack panel,
rear panels for separate cleaning: and remove it from the oven.
- Switch off the oven and grill.
Unscrew the locknuts.
- Lift the runners and the side panels
over the now protruding screws,
and remove from the oven.
- Check whether the tan on the rear
wall of the combi-oven is dirty, and
clean if necessary. (Do not bend, as
this could give rise to extra noisos).
Important:
The oven must not he used without
the fitted rear panel in place. This
could lead to injuries.
- Reassemble in reverse order, and
take care to secure.
37