Problem Possible cause and remedy
On ovens with a
clock/timer, i2:00 starts
flashing in the display.
There has been a power cut.
^
Reset the time of day (see "Using for the first time").
Cooking durations will also need to be reset for any
programme in use.
0:00 appears
unexpectedly in the
display and T is
flashing at the same
time. The buzzer might
also be sounding.
The oven has been operating for an unusually long time
and this has activated the safety switch-off function.
^
Turn the function selector to 0. The oven is now ready
to use again immediately.
A noise can be heard
after a cooking process.
The cooling fan is switched on.
The cooling fan will switch off automatically when the
temperature in the oven interior has fallen sufficiently.
Spots like rust appear
on catalytic surfaces.
The catalytic cleaning process does not remove spices,
sugar and similar deposits.
^ Take catalytic panels out of the oven and remove this
type of deposit with a mild solution of hot water and
washing-up liquid applied with a soft brush (see
"Cleaning and care / Cleaning the catalytic back
panel").
Problem solving guide
86
To Next Page
Loading...
