If pyrolytic cleaning is cancelled
If the Pyrolytic cleaning programme
is cancelled the oven door will remain
locked until the temperature inside
the oven drops to below 280 °C. The
0 symbol will light up until the
temperature has dropped below this
level.
The door can be opened as soon as
the 0 symbol starts flashing.
The following will cause the Pyrolytic
cleaning programme to stop:
– Turning the function selector to ß.
Once the door has been unlocked, 0
will go out and the time of day will
reappear in the display. If necessary
start the pyrolytic programme ^
again.
– Turning the function selector to a
different function.
PY and 0 will appear in the display.
Once the door has been unlocked, 0
will go out and PY will start to flash.
–
A power cut.
PY and 0 will appear in the display.
Once the door has been unlocked, 0
will go out and PY will start to flash.
When power is restored PY will light
up until the temperature in the oven
has dropped below 280 °C. 0 will
then appear in the display.
The door lock releases. 0 goes out
and the time of day reappears.
Cleaning and care
91
To Next Page
Loading...
