Removing the back panel
,
Danger of injury.
Do not use the oven without the
back panel.
The back panel can be removed for
cleaning purposes.
,
Danger of burning.
Make sure the oven heating
elements are switched off and cool.
^
Disconnect the appliance from the
mains.
^ Remove the side runners.
^ Undo the four screws in the corners
of the back panel and take it out.
^ Clean the back panel (see "Cleaning
and Care / Cleaning the catalytic
enamelled back panel").
Refit in the reverse order.
Carefully refit the back panel. Make
sure the openings are located as
illustrated in "Oven overview".
^
Reconnect the oven to the electricity
supply.
Lowering the top heat/grill
element
,
Danger of burning.
Make sure the oven heating
elements are switched off and cool.
^
Remove the side runners.
^ Undo the wing nut.
Do not use force to lower the top
heat/grill element as this can cause
it to break.
^
Carefully lower the top heat/grill
element.
You can now clean the roof of the oven.
^
Raise the top heat/grill element and
tighten the wing nut securely.
^
Refit the side runners.
Cleaning and care
95
To Next Page
Loading...
