Display brightness
The brightness is represented by a bar
with seven segments.
P P P P G G GM
Turn the rotary selector clockwise W to
make the display brighter, or anti-
clockwise V to make it darker.
Buzzer tones
Melody
At the end of a process, a melody will
sound several times in intervals.
The volume of the melody is
represented by a bar with seven
segments.
P P P P G G GM
Turn the rotary selector clockwise W to
increase the volume, or anti-clockwise
V to decrease it.
Maximum volume is selected when all
segments are filled.
If none of the segments are filled the
volume is switched off.
Solo tone
At the end of a process, a continuous
tone will sound for period of time.
The pitch of this tone is represented by
a segment bar.
O O O O O O O O F F F F F FM
Turn the rotary selector clockwise W or
anti-clockwise V to alter the pitch.
Keypad tone
An audible tone is heard each time a
sensor is touched.
The volume of the keypad tone is
represented by a bar with seven
segments.
P P P P G G GM
Turn the rotary selector clockwise W to
increase the volume, or anti-clockwise
V to decrease it.
Maximum volume is selected when all
segments are filled.
If none of the segments are filled the
keypad tone is switched off.
Settings
42
To Next Page
