Operating the cooktop
40
Never heat an empty pot! This
c
an damage the glass ceramic
surface.
Never leave the cooktop unattended
during use!
Hot pans on the display can
c
ause damage to the electronics
underneath.
NEVER place hot pots or pans near
the display
.
The burner control knobs have a
st
op.
Never turn the knob to the right to 0,
past the symbol or the last
nu
mber.
Turning on
P
ress the burner knob and turn it to
the right to the desired setting.
Turning on the second heating zone
Variable burners have a second heating
zone that you can turn on.
You have to overcome slight
r
esistance in order to turn the knob
from 12 to .
P
ress the burner knob in and turn it
clockwise past "12" to the stop, to
.
The second heating zone turns on.
The
n turn the knob to the left to the
desired setting.
Turning off
T
urn the burner knob to the left to 0.
Residual heat display
When after turning on one burner, for
e
xample the left front, a specified
temperature is reached, the associated
residual heat indicator lights up:
A little while after turning off the burner,
the r
esidual heat indicator goes out.
Risk of burns! Do not t
ouch the
burners while the residual heat
indicators are on.
To Next Page
Loading...
