Installation and connection
24
Attach the mounting plate to the wall.
Connecting the accessories
holder (if required)
An accessories holder is supplied for
storing the 3-piece accessory set on
the wall bracket (see “Using the ac-
cessories supplied”).
Push the accessories holder onto the
wall bracket as far as it will go.
Connecting the wall bracket
Slide the wall bracket down into the
mounting plate from above until it
audibly clicks into place.
Slide the PowerUnit of the fully as-
sembled vacuum cleaner, with the
battery inserted, down into the wall
bracket from above.
Plug the supplied charging cable into
the charging socket on the bottom of
the battery.
Plug the charger into the power
socket.
To Next Page
Loading...
