EasyManua.ls Logo

Miele HS19 - Battery Charging Indicators

Miele HS19
48 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Installation and connection
25
The charging process will start.
Battery charging state indic-
ator (while charging)
The battery charging state is displayed
on the PowerUnit.
Charging capacity Display
Approx.0–34% Bottom light
flashes slowly
Approx.35–69% Bottom light is
lit up; middle
light flashes
slowly
Approx.70–90% Bottom and
middle lights are
lit up; top light
flashes slowly
Approx.91–99%
100%
Bottom, middle
and top lights
are lit up
Switches off
Once the battery is fully charged, the
battery charging state indicator
switches off to conserve energy.
If the battery has not been used for a
long time and has run down, it will go
into safe mode. As a result, the battery
charging state indicator will only re-
spond after approximately 30–60
minutes when charging in the
PowerUnit.
Battery charging state indic-
ator (while in use)
The battery charging state is displayed
on the PowerUnit.
Charging capacity Display
Approx.100–70% Top, middle and
bottom lights
are lit up
Approx.69–35% Middle and bot-
tom lights are lit
up
Approx. 34–15% Bottom light is
lit up
Approx. 14–0% Bottom light
flashes slowly
We recommend allowing the battery to
run down completely before recharging
it. In this way, you will benefit from the
battery's full capacity.

Table of Contents

Related product manuals