^
Then separate retaining plate f from
cover e by pushing it slightly to the
left. Then pull the cover forwards and
off.
^
Rotate retaining plate f by 180°.
^
Then fit cover e from the front over
retaining plate f, and slide it over to
the right. The writing must be visible.
^
Remove cover g, then rotate it by
180° and fit it on the opposite side.
^
Then fit cover e together with
retaining plate f on the opposite
side.
^
Remove cap h from the bearing
bush in the door and refit on the
opposite side.
Changing the door hinging
55
To Next Page
Loading...
