Miele K 31222 Ui Manual

10841790-04
Installing the appliance
*INSTALLATION*
To install the appliance, you
will need the following tools:
Parts required for installation
All installation parts are designated by
number. This numbering is also used in
the installation instructions.
Preparing the appliance
 Position the appliance in front of the
housing unit.
 Grasp the plinth cover at the side and
pull it off towards the front.
You have a choice of two different
ways of securing your appliance:
1. Top mounting
This type of mounting is suitable for
mounting under worktops made of
synthetic materials, e.g. laminate.
The worktop must be suitable for
screwing a mounting bracket onto.
With the appliance feet fully extended
the appliance should sit lightly
tensioned between the floor and the
worktop.
2. Side mounting
This type of mounting is suitable for
mounting under hard worktops, e.g.
granite. Furniture side walls are
needed to the right and left of the
refrigerator, to which the mounting
brackets can be screwed.
With the feet fully extended the
refrigeration appliance will sit lower
than the worktop.

Miele K 31222 Ui Specifications

General

Door hinge	Right
Control type	Buttons
Product color	-
Reversible doors	Yes
Appliance placement	Built-in
Door panel included	No
Fridge door balconies	2
Number of vegetable drawers	1
Fridge number of shelves/baskets	4
Lamp type	LED
Cord length	1.9 m
Noise level	35 dB
Climate class	SN-ST
Fridge net capacity	137 L
Fridge gross capacity	- L
Current	10 A
Connected load	- W
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Energy efficiency scale	A to G
Annual energy consumption	115 kWh

Weight and Dimensions

Depth	552 mm
Width	597 mm
Height	818 mm
Weight	38100 g
Installation compartment depth	550 mm
Installation compartment width	600 mm
Installation compartment height	870 mm