Miele K 31222 Ui Manual

10841790-04
Installing the appliance
*INSTALLATION*
 The foam ensures the airflow
is separated to prevent
malfunctioning of the appliance.
 Insert the piece of foam  supplied.
 Refit the plinth panel, but do not
secure it in position yet.
Without a continuous plinth panel:
 Pull the plinth panel  forwards until
the ventilation slats are in alignment
with adjacent cabinet plinth panels.
 Hold the plinth panel securely and
attach it to the right and left using the
bolts supplied.
With a continuous plinth panel:
 Push the plinth panel right up
against the refrigerator and attach it
to the right and left using bolts.
Fitting a continuous furniture
plinth panel
Ventilation takes place through a
ventilation grille in the appliance
plinth.
The ventilation gaps must never be
obstructed.
If a continuous plinth panel is to be
fitted, a suitable ventilation gap will
need to be made in it for the
ventilation grille of the appliance:
 Trim the furniture plinth panel (U) to
the correct height.
 Adjust the height (V) along the niche
width (W) underneath the appliance
plinth .

Miele K 31222 Ui Specifications

General

Door hinge	Right
Control type	Buttons
Product color	-
Reversible doors	Yes
Appliance placement	Built-in
Door panel included	No
Fridge door balconies	2
Number of vegetable drawers	1
Fridge number of shelves/baskets	4
Lamp type	LED
Cord length	1.9 m
Noise level	35 dB
Climate class	SN-ST
Fridge net capacity	137 L
Fridge gross capacity	- L
Current	10 A
Connected load	- W
AC input voltage	220 - 240 V
AC input frequency	50 Hz
Energy efficiency scale	A to G
Annual energy consumption	115 kWh

Weight and Dimensions

Depth	552 mm
Width	597 mm
Height	818 mm
Weight	38100 g
Installation compartment depth	550 mm
Installation compartment width	600 mm
Installation compartment height	870 mm