10841790-04
Installing the appliance
*INSTALLATION*
Useful tip: Push up the fitting aids
with the furniture front.
Undo the nuts and take the fixing
bracket off together with the fitting
aids.
Place the furniture door with the outer
side downwards on a stable surface.
Using a pencil, lightly mark a line
down the centre of the inside of the
furniture door.
Hang the fixing bracket with the
fitting aids onto the inside of the
furniture door. Align the fixing bracket
centrally.
Attach the fixing bracket securely
using at least 6 short chipboard
screws. (On cassette doors only
use 4 screws on the edges). Drill pilot
holes into the furniture door if
necessary.
Pull the fitting aids upwards to
remove them .
Turn them around and fit them into
the middle slots on the fixing bracket
for safe keeping.