Moving the shelves
The shelves can be adjusted according
to the height of the food.
^ Using both hands, grasp the shelf
from underneath and lift slightly so
that the rear of the shelf is slightly
above the mountings.
^ Pull the shelf forward.
^ Move the shelf to the desired height,
then insert the (rear) hooks into
place.
^ Make sure the shelf is level.
Floating drawer
The floating drawer can be moved to
the left or right, moved to another shelf,
or removed.
^ Pull the drawer straight out, so that it
passes over the catches and remove.
^ To replace the drawer slide it straight
in along the rails.
SmartFresh drawer
These drawers are set on telescopic
tracks. They can be pulled in and out
for loading and unloading, or removed
for cleaning.
^ Open the drawer.
On the hinged-side of the door is a
safety lock, which must be turned to a
horizontal position before the drawer
can be removed.
^ Using a suitable object, e.g., coin,
turn the safety lock to a horizontal
position a.
^ On both sides of the drawer, pull the
latches b upward and lift the drawer
out of the refrigerator.
Push the tracks back into the
refrigerator to avoid injury.
Adjusting the interior fittings
26
To Next Page
Loading...
Need help?
General
