The stainless steel doors have a
special coating that is soil-resistant.
Do not wipe these with a stainless
steel conditioner, it will leave visible
streaks.
Use a stainless steel conditioner to
clean and maintain the stainless
steel surfaces of the appliance. It
contains material-friendly
substances and - unlike stainless
steel cleaning agents - no polishing
substances.
This gently removes soiling and
each application forms a protective
layer that is stain- and
water-repellent.
Before cleaning
^ Use the main switch to turn the
appliance off completely.
The main switch is located on the right
side underneath the control panel.
^ Unplug the power cord.
^ Remove any food from the appliance
and store it in a cool place.
^ Take out any removable parts,
e.g., shelves.
Cleaning the interior and
accessories
Use a mild solution of warm water and
liquid dish soap. Wash all accessories
and drawers by hand. Do not wash in a
dishwasher.
^ Clean the appliance as needed.
^ After washing, wipe down the interior
and accessories with a clean wet
cloth, then dry with a soft cloth.
Leave the appliance doors open for a
short time, so the moisture can
evaporate.
Appliance doors
Remove soiling on the appliance
doors and side walls right away. If
soiling is left on, it may become
diffficult to remove and the surfaces
may discolor.
All surfaces are susceptible to
scratches. All surfaces may become
discolored when they come into
contact with unsuitable cleaning
materials.
^ Clean the surface with a soft sponge,
liquid dish soap and warm water. A
clean, damp microfiber cloth may
also be used, without a cleaning
agent.
^ After cleaning, rinse everything with
clean water, then dry with a soft
cloth.
Cleaning and care
31
To Next Page
Loading...
Need help?
General
