Attaching the appliance to the
installation niche
^ Open the appliance doors.
^ Fasten the appliance on the left and
right hand sides with the 3 (supplied)
wood screws.
If there is a fairly large gap above the
appliance, cut a wooden beam to fit
exactly and place it in the gap.
Now connect the water supply to the
appliance (see "Plumbing").
^ Open the lower appliance door and
hand the stainless steel cover on the
double-threaded bolts.
^ Screw the nuts onto the
double-threaded bolts.
^ Replace the cover strip.
Installing the appliance
73
To Next Page
Loading...
Need help?
General
