Building in the appliance
29
Before installation
Heavy weight!
This appliance is very heavy and can
tip forwards when the door is open.
Prepare the plumbed water connec-
tion for the appliance (see “Plumbed
water connection”).
Before installation, remove any ac-
cessories from the back of the appli-
ance.
Check the appliance for damage dur-
ing transportation.
Do not install a damaged appliance.
Check that all parts at the back of the
appliance are unhindered.
To protect the floor when installing
the appliance, secure an off-cut of
flooring or similar material to the floor
in front of the installation area.
Risk of tipping over!
Make sure the appliance is no longer
secured to the pallet as soon as you
unscrew the brackets that fix the ap-
pliance to the pallet.
Unscrew the brackets .
With the help of several people as re-
quired, carefully lift the appliance
from the pallet, starting with the back
of the appliance.
As soon as you have set the appliance
upright, you can move it using the
rollers on the bottom.
To Next Page
Loading...
Need help?
General
