Building in the appliance
37
Connect the appliance to the house-
hold water supply (see “Plumbed wa-
ter connection”).
Securing the base cover plate
and the baseboard
Do not cover the vents in the base.
This will damage the appliance!
Remove the film from the base cover
plate .
Secure the base cover plate to the
baseboard.
Click the baseboard onto the bot-
tom of the appliance base.
Aligning the appliance doors
After installation, align the appliance
doors with adjacent cabinetry fronts.
To do this, check the gaps to the adja-
cent cabinetry fronts.
If necessary, use the spacers pro-
vided and place them at the top of
the appliance doors on both sides.
To Next Page
Loading...
Need help?
General
