Miele KF 2811 SF - Side-By-Side

Installation information
19
Side-by-side
This appliance can be installed side-by-
side with another refrigeration appli-
ance. The following overview will show
you which side-by-side options you
have with your appliance:
A side-by-side merging kit and a top
frame (KTF) are required for this. Both
are available from your Miele dealer or
Miele Technical Service.
Instructions for installing appliances
side-by-side can be found in the side-
by-side merging kit instruction man-
ual.
...with partition wall
The wall a between the side-by-side
appliances must be at least
5/8" (16mm) thick.
The appliances are secured individually
in their niche using the supplied instal-
lation material.
If the partition wall a is narrower than
65/16" (160mm), you will need the
side panel heater from the side-by-side
installation kit to prevent condensation
from forming and any resulting damage.
If the partition wall a is thicker than
65/16" (160mm), you do not need the
side-by-side installation kit, nor the side
panel heater.
. . .without partition wall
If the appliances are to be installed next
to each other without a partition wall
between them, they will need to be
joined together with the side-by-side in-
stallation kit. In addition, you must in-
stall the side panel heater to prevent
condensation from forming and any re-
sulting damage.