Miele KF 2811 SF - Switching On, Switching Off, or Resetting the Display Active Airclean Filter

Selecting additional settings
74
The Water Filter Display has been
switched off.
Resetting Water Filter Display
After replacing the water filter (see “Wa-
ter filter”, section “Changing the water
filter”), you will have to reset the Water
Filter Display.
 In settings mode, use the and
arrow buttons to select Water Filter
Display and select OK to confirm your
selection.
 Use the and arrow buttons to
select Reset and touch OK to confirm
your selection.
The message Replace the water filter dis-
appears from the display.
The reminder function for the next water
filter change is activated.
Switching on, switching off, or
resetting theDisplay Active
AirClean Filter
Approximately every 6months, the Ac-
tive AirClean filter display will remind
you to change the Active AirClean filters
(see “Inserting the Active AirClean fil-
ters” in “Before first use”). Change Active
AirClean Filterwill appear in the display.
The first time the Active AirClean fil-
ters need to be changed, the display
will remind you automatically; the re-
minder does not need to be switched
on separately.
After the Active AirClean filters have
been changed, the Active AirClean filter
reminder display must be reset (see
“Resetting the Active AirClean filter dis-
play”).
If the Active AirClean filter reminder
display is not reset, it will appear again
after 7days.
If you do not require the Active Air-
Clean filter reminder display, it can be
switched off (see “Switching off
theDisplay Active AirClean Filter”).
New Active AirClean filters are avail-
able from Miele Technical Service,
your Miele dealer, or online.