Building in the appliance
36
Risk of damage!
Unscrew the feet only until the
marking on the base is aligned to a
maximum of 27/16" (62mm) (max.
niche height of 85 3/16" (2164mm)).
Otherwise the rear foot adjustment
will be damaged.
Use a level to check the alignment
of the appliance.
Securing the appliance in the
niche
Use the screws supplied to secure
the refrigeration appliance on both
sides.
In a side-by-side combination, only
the external panels of the two appli-
ances can be secured to the cabinet
wall.
Slide the cover onto the lower appli-
ance door from the inside.
To Next Page
