Miele KF 2811 SF - Page 35

Building in the appliance
35
 Adjust the rear feet with a ratchet
(attachment: 5/16" (8mm) socket) or
a TX20 screwdriver.
 Adjust the front feet with a ratchet
(attachment: 5/16" (8mm) socket) or
a TX20 screwdriver.
Tip: Proceed carefully when adjusting
the feet, alternating between the left
and right feet.
 Unscrew the feet and on both
sides at least until the marking on the
base is aligned with the required
11/4" (32mm) on the spacer. The
standard dimension of 11/4" (32mm)
relates to a niche height of
84" (2134mm).
It is important to align the feet to a
height of at least 11/4" (32mm) so
that the appliance's ventilation works
properly via the base.