Miele KF 2811 SF - Page 75

Selecting additional settings
75
Switching on theDisplay Active Air-
Clean Filter
If theDisplay Active AirClean Filter has
been switched off once, it must be
switched on again if required.
 In settings mode, use the and
arrow buttons to selectDisplay Active
AirClean Filter and selectOK to confirm
your selection.
 Use the and arrow buttons to
selectOn and touchOK to confirm
your selection.
TheDisplay Active AirClean Filter has
been switched on.
Switching off theDisplay Active Air-
Clean Filter
If you do not require theDisplay Active
AirClean Filter, you can switch it off.
 In settings mode, use the and
arrow buttons to selectDisplay Active
AirClean Filter and selectOK to confirm
your selection.
 Use the and arrow buttons to
selectOff and touchOK to confirm
your selection.
TheDisplay Active AirClean Filterhas
been switched off.
Resetting theDisplay Active AirClean
Filter
TheDisplay Active AirClean Filter must be
reset each time the filter is replaced, so
that it is displayed again after 6months.
 In settings mode, use the and
arrow buttons to selectDisplay Active
AirClean Filter and selectOK to confirm
your selection.
 Use the and arrow buttons to
selectReset and touchOK to confirm
your selection.
The Change Active AirClean Filtermessage
disappears from the display.
The Display Active AirClean Filter has
been reset.