Cleaning and care
32
The surface of the burner cap will be-
come duller with time. This is com-
pletely normal and does not indicate
material deterioration.
Assembling the small, medium and
large burners
Place the burner head on the
burner base so that the thermo-
couple and the ignitor extend
through their respective holes in the
burner head. The burner head must
click into place correctly.
Place the burner cap flat over the
burner head. When correctly posi-
tioned, the burner cap will not slide
about.
Ensure parts are reassembled in the
correct order.
To Next Page
