b Building-in depth
c Building-in depth for mains
connection box
d Front
Flush fit hobs are only suitable for
installation in granite, marble, tiled or
solid wood worktops. Other
materials such as Corian and
Askilan are not suitable.
An 800 mm wide base unit is
required for building in.
The hob must be accessible from
below for servicing purposes and to
ensure that the seal around it is not
dislodged.
The hob can be installed
–
directly into a suitable cut-out in a
granite or marble worktop.
–
in a suitable cut-out in a tiled or solid
wood worktop with a wooden support
frame. The frame must be provided
on site, and is not supplied with the
appliance.
Installation
68
To Next Page
Loading...
