Programme* Status** Setting
P3.Residual heat indicator S 0 H as the residual heat
indicator symbol
S1# as the residual heat
indicator symbol
P4.Timer default setting S001 or 99
S 1 The most recently set time
(see "Timer default setting")
P5.Timer functions S 0 Minute minder only
S 1 Auto switch-off only
S2Minute minder and Auto
switch-off
P6.Power setting range S09 power settings
(1 to 9)
S 1 17 power settings
(1, 1., 2, 2., 3 ... to 9)
If the Auto heat-up setting is
selected, an A will flash
alternately with the
continued cooking setting in
the display.
* Programmes not shown here have no allocation.
** The factory default settings are shown in bold.
Programming
43
To Next Page
Loading...
