Programme* Status
**
Setting
P7 Extended cooking
area when switching
on a cooking zone
S0 Not switched on at the same time
Switches on at the same time as
follows:
S 1 Front left
S 2 Front right
S 3 Back middle (KM 5673)
S 4 Back right (KM 5670)
S 5 Front left and front right
S 6 Front left and back middle (KM 5673)
S 7 Front left and back middle (KM 5673)
S 8 Front left and back right (KM 5670)
S 9 Front right and back right (KM 5670)
S 10 Switch on all extended areas
P10 Power setting when
the cooking zone is
switched on
S0 0
S 1 6 (can only be selected when Auto
heat-up is activated)
P12 Auto heat-up S 0 Off
S1 Activated by selecting the power
setting using -
S 2 Activated by selecting the power
setting using +
S 3 Activated every time the hob is
switched on
P13 Residual heat
indicator
S0H as the residual heat indicator symbol
S1 # as the residual heat indicator symbol
* Programmes not shown here have no allocation.
** The factory default settings are shown in bold.
Programming
39
To Next Page
Loading...
