Programme* Status** Setting
P0Demonstration mode and
factory default settings
S 0 Demonstration mode on
S1 Demonstration mode off
S 9 Factory default settings
reinstated
P1Keypad tone when a
sensor is touched
S 0 Off
S1 On
P2Induction warning tone
when there is no pan or
the pan is unsuitable
S0 Off
S1 On
P3Audible tone for the Timer S 0 Off
S1 Audible tone on for 10 seconds
S 2 Audible tone on for 4 minutes
P4Safety lock S0 One finger locking using $
S 1 Three finger locking using $ and
+ on the two right-hand cooking
zones
P5Stop and Go S0 Off
S1 On
P0.Power setting when the
cooking zone is switched
on
S0 0
S 1 5 (can only be selected when
Auto heat-up is activated)
* Programmes/Statuses not shown here have no allocation.
** The factory default settings are shown in bold.
Programming
44
To Next Page
Loading...
