Please stick the extra data plate for the appliance supplied
with this documentation in the space provided in the "After
sales service, data plate" section of this booklet.
Cleaning for the first time
Remove any protective wrapping and adhesive labels.
Before using for the first time, clean the appliance with a
damp cloth only and then wipe dry.
Do not use washing up liquid to clean the ceramic surface
as it can leave a blue sheen which may be difficult to
remove.
Before using for the first time
On hobs with bevelled glass edges, a small gap may be
visible between the hob and the worktop during the first
few days after installation. This gap will reduce with time as
the appliance is used and will not affect the electrical
safety of your appliance.
When the appliance is used for the first time, it may give off a
slight smell. The smell and any vapours will dissipate after a
short time. They are not harmful and do not indicate a faulty
connection or appliance.
Please note that the heating up time on induction hobs is
very much shorter than on conventional hobs.
Before using for the first time
19
To Next Page
Loading...
