Auto heat-up
When Auto heat-up has been activated, the cooking zone
switches on automatically at the highest power level/setting
and then switches to the continued cooking setting selected.
The heat-up time depends on which continued cooking
setting has been chosen (see chart).
To activate Auto heat-up
^
Touch the sensor for selecting the cooking zone you want.
The cooking zone display will flash.
^
Press the - sensor until the required continued cooking
setting appears, e.g. 6.
During the heat-up time an indicator lamp to the right of the
continued cooking setting will light up, and go out at the end
of it.
In the extended range of power settings (see
"Programming"), A flashes alternately with the continued
cooking setting during the heat-up time.
Altering the continued cooking setting will deactivate auto
heat-up.
To deactivate Auto heat-up
You can switch off Auto heat-up before the Auto heat-up time
has finished.
^
Touch the sensor for selecting the cooking zone you want.
The power level will flash.
^
Select a different power level.
Operation
26
To Next Page
Loading...
