The hob must be switched on to use the timer.
The timer can be used for two different functions:
–
to set the minute minder
–
to set a cooking zone to switch off automatically.
You can enter a time up to a maximum of 99 minutes.
Minute minder
To set the minute minder time
Example: You want to set 15 minutes.
^
Switch the hob on.
^ Touch the m sensor.
00 will appear in the timer display. The 0 on the right will
flash.
Enter the tens first and then the units.
^ Touch the number on the numerical keypad which
corresponds to the tens position (1 in this case).
The timer display will change and 1 will start flashing.
^ Touch the number on the numerical keypad which
corresponds to the units position (5 in this case).
The timer display will change. The 1 moves to the left and 5
appears on the right.
The minute minder time will begin to count down.
To change the minute minder time
^
Touch the m sensor.
^
Set the time you want, as described above.
Deleting the minute minder time
^
Touch the m sensor until 00 appears in the timer display.
Timer
36
To Next Page
