Programme* Status** Setting
P00Demonstration
mode and
factory default
settings
S 0 Demonstration mode on
(after the hob is switched on, "dE" will
appear in the timer display for a few
seconds).
S1Demonstration mode off
S 9 Factory default settings reinstated
P01Stop and Go S 0 Off
S1On
P02Power level
range
S09 power levels
(1, 2, 3 ... to 9)
S 1 17 power levels
(1, 1., 2, 2., 3 ... to 9)
If the Auto heat-up setting is selected, an
A will flash alternately with the continued
cooking setting in the display.
P03Induction
warning tone
when there is no
pan or the pan
is unsuitable
S0Off
S 1 Quiet
S 2 Medium
S 3 Loud
P04Keypad tone
when a sensor
is touched
S 0 Off
S 1 Quiet
S2Medium
S 3 Loud
P05Timer audible
tone
S 0 Off
S 1 Quiet for 10 seconds
S2Medium for 10 seconds
S 3 Loud for 10 seconds
* Programmes/ Status numbers not shown here have no allocation.
** The factory default settings are shown in bold.
Programming
48
To Next Page
Loading...
