Do not leave the appliance unattended whilst it is being
used.
To switch the hob on
^
Touch the s sensor.
All the sensors will light up. If no further entry is made, the
hob will switch itself off after a few seconds for safety
reasons.
Activating the cooking zones
A cooking zone is not active if only the "0" is lit up in the
numerical keypad.
^ Touch the "0" to activate the zone.
All the power levels will light up.
Setting the power level
Standard power level range
^ Touch the appropriate number on the numerical keypad of
the cooking zone you wish to use.
Extended power level range
(see "Power level range")
^
Touch the area between the numbers.
For example, if you have selected power level 7+, the
numbers 7 and 8 will light up more brightly than the other
numbers.
Altering the power level
^
Touch the appropriate number on the numerical keypad of
the cooking zone you wish to use.
Operation
28
To Next Page
Loading...