Stop and Go
Your appliance has a Stop and Go feature which, when
activated, reduces the power of all cooking zones in use to
power level 1. When Stop and Go is activated, the cooking
zone power levels and the setting of the timer cannot be
altered and the hob can only be switched off.
When Stop and Go is deactivated, the cooking zones resume
at the power level which was last set.
If Stop and Go is not deactivated, the hob switches off after 1
hour.
When Stop and Go is activated
- the countdown of a time programmed in for automatic
switch-off will be interrupted. When deactivated, the time
will continue to run.
- the minute minder will continue without interruption.
Activating
^ Touch the sensor.
The power of the cooking zones in use will be reduced to
power level 1.
Deactivating
^
Touch the sensor.
The cooking zones will now run at the level that was
previously set.
Safety features
45
To Next Page
Loading...
