Auto heat-up
When Auto heat-up has been activated, the cooking zone
switches on automatically at the highest power setting and
then switches to the continued cooking setting selected. The
heat-up time depends on which continued cooking setting
has been chosen (see chart).
Activating
^
Touch the number of the continued cooking setting you
require until a tone sounds and the continued cooking
setting selected starts flashing.
The continued cooking setting selected will flash during the
heat-up time.
If the range of power levels/settings has been extended (see
"Programming") and one of the intermediate continued
cooking settings has been selected (e.g. 3+) the power level
before and after the intermediate setting will flash (e.g. 3 and
4).
Altering the continued cooking setting will deactivate auto
heat-up.
Deactivating
^
Touch the continued cooking setting which has been
selected until the display lights up constantly
or
^
select a different power level.
Operation
30
To Next Page
Loading...
