Need help?Do you have a question about the Miele KMDA 7272 FR-A and is the answer not in the manual?
General| Appliance category | Hob |
|---|---|
| Appliance type | Induction |
| Type | Built-in |
| Number of Cooking Zones | 4 |
| Power Levels | 9 |
| Safety Features | Child lock, automatic switch-off, residual heat indicator |
| Boost Function | Yes |
| Hood type | Integrated |
| Color | Black |
| Number of burners | 4 |
| Burner power | Up to 3700 W |
| Ignition | Automatic |
| Material | Glass ceramic |
| Control Type | Touch |
Describes the intended use and limitations of the hob.
Provides safety guidelines for children around the hob.
Details electrical safety and installation requirements for safe operation.
Outlines proper usage procedures and precautions to avoid hazards.
Instructions for environmentally friendly disposal of packaging.
Guidance on proper disposal of old appliances.
Diagram showing hob components and their layout.
Explanation of sensor controls and display indicators.
Specifications and ratings for each cooking zone.
List and description of included accessories.
Instructions for initial cleaning before first use.
Guidance on the initial power-on procedure.
Instructions for initial use of the vapour extraction system.
Explanation of induction technology and zone heating.
Description of normal operational sounds and their origins.
How the hob manages power distribution between cooking zones.
Details on extraction, recirculation, and Plug&Play modes.
Types of induction-compatible cookware.
Types of cookware unsuitable for induction hobs.
Method to test cookware for induction compatibility.
Display symbols for cookware errors.
Steps for using a cooking zone with cookware.
Recommendations for optimal cookware and hob usage.
General guide to operating the ceramic glass hob.
Procedure for switching the hob on.
How to set and adjust power levels for cooking zones.
Procedures for switching off zones or the entire hob.
Explanation of the residual heat indicator function.
Using the extended power level settings.
Using the Auto heat-up function for faster cooking.
Instructions for using the Booster function for rapid heating.
Details on using the Keeping warm function.
Operating the vapour extraction system and Con@ctivity.
Setting and using the minute minder.
Programming a cooking zone for automatic switch-off.
Using minute minder and auto switch-off simultaneously.
Activating and deactivating the Stop&Go function.
Resets settings after accidental hob switch-off.
Activating and deactivating demo mode for showrooms.
Viewing model/serial number and software version.
Activating and deactivating system and safety locks.
Automatic shut-off due to sensor cover or excessive operation.
Description of the overheating protection mechanism.
Accessing and modifying hob programming settings.
Selecting and setting programme numbers and codes.
Saving or discarding programming changes.
Detailed instructions for cleaning the hob's glass ceramic surface.
Cleaning and maintaining cover grille, grease, and charcoal filters.
Cleaning grease filter manually or in dishwasher.
Instructions for replacing the charcoal filter.
How to clean the drip tray of the vapour extraction unit.
Cleaning fan unit and resetting filter operating hours counters.
Explanation of error messages and their remedies.
Troubleshooting common operational issues.
Addressing issues with cooking performance.
Solutions for general and technical faults.
Crucial safety guidelines for installing the hob.
Specifies required clearances above and around the hob.
Detailed side and rear clearance requirements.
Safety distances related to niche cladding installation.
Overview of available operating modes (extraction, recirculation, Plug&Play).
Visual examples of different installation types.
Specific notes for surface-mounted installations.
Diagrams and dimensions for surface mounting.
Installation details for extraction and recirculation modes.
Installation details for Plug&Play mode.
Instructions for connecting to a window contact.
Detailed steps for surface-mounted installation.
Specific notes for flush-fit installations.
Diagrams and dimensions for flush-fit installations.
Detailed steps for flush-fit installation.
Instructions for creating cut-outs without a template.
Guidelines for connecting and installing exhaust ducting.
Essential information for connecting the hob to the electrical supply.
Procedures for contacting service for faults.
Locating and using the appliance's data plate.
Information regarding the appliance warranty.
To Next Page