Need help?Do you have a question about the Miele KMDA 7476 FL and is the answer not in the manual?
General| Overheat protection | Yes |
|---|---|
| Hob type | Zone induction hob |
| Frame type | Frameless |
| Product color | Black |
| Hob width size | 80 cm |
| Top surface type | Glass-ceramic |
| Appliance placement | Built-in |
| Cooking zone 2 boost | 4800 W |
| Cooking zone 2 power | 3400 W |
| Cooking zone 3 boost | 3000 W |
| Cooking zone 3 power | 2100 W |
| Cooking zone 1 position | Left |
| Cooking zone 2 position | Right |
| Cooking zone 3 diameter | 150 - 230 mm |
| Number of cooking zones | 4 zone(s) |
| Cooking zone 2 double boost | 7300 W |
| Cooking zone 2 size (W x D) | 230 x 460 mm |
| Cooking zone 3 double boost | 3650 W |
| Cooking zone 3 power source | Electric |
| Number of gas cooking zones | 0 zone(s) |
| AC input voltage | 230 V |
| AC input frequency | 50-60 Hz |
| Connected load (gas) | - W |
| Connected load (electric) | 7500 W |
| Noise level | 69 dB |
| Energy efficiency class (hood) | A++ |
| Control type | Touch |
| Control position | Top front |
Weight and Dimensions| Depth | 520 mm |
|---|---|
| Width | 800 mm |
| Height | 200 mm |
| Weight | 20000 g |
| Cord length | 2 m |
| Installation compartment depth | 500 mm |
| Installation compartment width | 780 mm |
Defines the intended use of the hob and its limitations.
Guidelines for ensuring children's safety around the hob.
Essential electrical and installation safety requirements.
Instructions for safe operation and hazard avoidance.
Preventing accidental operation or setting changes.
Safety switch-off for covered sensors or excessive operating time.
How the hob protects itself from overheating.
Troubleshooting steps for a non-functional hob.
Troubleshooting common error messages and codes.
Critical safety warnings and requirements for installing the hob.
Required clearances above and around the hob for safety.
Guidelines for connecting exhaust ducting and power supply.
To Next Page