Need help?Do you have a question about the Miele KMDA 7774-1 and is the answer not in the manual?
General| Type | Induction Hob |
|---|---|
| Width | 80 cm |
| Number of Cooking Zones | 4 |
| Power Levels | 9 |
| Control Type | Touch Control |
| Boost Function | Yes |
| Child Lock | Yes |
| Safety Switch Off | Yes |
| Design | Frameless |
| Con@ctivity | Yes |
| PowerSlide Control | Yes |
| Automatic Pan Detection | Yes |
| Residual Heat Indicator | Yes |
| Color | Black |
| Total Power | 7400 W |
Outlines precautions and rules for supervising children around the hob.
Covers safe installation, maintenance, earthing, and power connection requirements.
Warns about potential toxic fumes when using the hob with other room-air-dependent appliances.
Details safe practices during cooking, avoiding fires, and handling hot items.
Details the sensor controls and indicator lights on the hob.
Lists suitable and unsuitable types of pans for induction hobs.
How to select power levels for cooking zones.
Information on the TwinBooster function for rapid heating.
How to set and use the timer for cooking durations.
How to set automatic switch-off times for cooking zones.
Explains the system lock and safety lock functions and how to activate/deactivate them.
Explains automatic switch-off due to covered controls or excessive operating time.
Details the overheating protection mechanism for coils and cooling elements.
Lists cleaning agents that should not be used to avoid appliance damage.
Detailed instructions for cleaning the ceramic glass surface.
Remedies for the hob not powering on.
Addresses automatic switch-off due to operation time or overheating.
Troubleshooting fault codes like Err, 30, and 1-and-a-number.
Warning about damage and the need for qualified installation.
Warning about electric shock from incorrect connection.
Specifies the required clearance above the hob for cooker hoods.
Details minimum clearances to walls and tall units from the sides and back.
Detailed diagrams and dimensions for the KMDA 7774 FR model (Onset).
Detailed diagrams and dimensions for the KMDA 7774 FL model (Onset).
Installation dimensions for 600 mm worktop depth for both models.
Installation dimensions for worktops deeper than 600 mm for both models.
Detailed diagrams and dimensions for the KMDA 7774 FL model (Flush-fit).
Installation dimensions for 600 mm worktop depth for Flush-fit KMDA 7774 FL.
Installation dimensions for deeper worktops for Flush-fit KMDA 7774 FL.
Detailed steps for onset hob installation.
Detailed steps for flush-fit hob installation.
Safety warning about toxic fumes when using hood with other appliances.
Importance of matching connection data to the mains supply.
Safe methods for disconnecting the hob from the mains supply.
Warnings and procedures for replacing the mains connection cable.
Electrical wiring diagrams for connecting the hob.
How to contact Miele Service for faults and what information to provide.
To Next Page