EasyManua.ls Logo

Miele Paragon sensor - Checking the Condenser Unit; Cleaning the Condenser Unit

Miele Paragon sensor
56 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
^
Pull the condenser unit out of its
housing by the handle.
Checking the condenser unit
^
Hold the condenser unit up to the
light as shown.
^
Check to see if there is any fluff
inside it.
The arrows in the illustration above
indicate where to look.
If you cannot see any fluff:
^
Replace the condenser unit (see
following page).
If you can see some fluff:
^
Clean the condenser unit as
described below.
Cleaning the condenser unit
^
When rinsing the condenser unit,
make sure you position it as
shown in the next two illustrations.
^
Use a shower head or similar to rinse
the unit out as shown.
Cleaning and care
27

Table of Contents

Related product manuals