Keypad tone
An audible tone sounds each time a
button is pressed.
The machine is delivered with the
keypad tone deactivated. You can
activate it if wished.
Follow steps A to F to programme and
store in memory.
Before you begin, first ensure that
:
–
The tumble dryer is switched off.
–
The door is closed.
A Press the Start/Stop button and keep
it pressed in whilst carrying out steps
B-C.
B Press the I-On/0-Off button in.
Wait until the indicator light for the
Start/Stop button lights up constantly
...
C . . . and then release the Start/Stop
button.
D Press the Buzzer button five times.
–
The Buzzer indicator light will flash
on and off slowly once and will then
flash on and off quickly once.
– P and 0 (default setting) will flash
alternately in the display.
The number which appears alternately
in the display with P means:
0 Key pad tone is deactivated
(Default setting)
i Key pad tone is activated
(the Drying indicator light will also
flash)
E Pressing the Start/Stop button
switches from one to the other.
F Switch the machine off with the
I-On/0-Off button.
The setting you have selected is now
stored in memory. You can change it
again at any time.
Programmable functions
52
To Next Page
Loading...
Need help?
General
