Electrical connection
*INSTALLATION*
119
Peak-load negotiation
The commercial dishwasher is suitable for use in an energy
management system. For this purpose, it must be technically adapted
and the controls reset by the Miele Customer Service Department.
Please contact the Miele Customer Service Department for further
information.
Peak load
management
In the event of a peak-load negotiation, some components of the
commercial dishwasher such as the heater element will be switched
off for a while. The commercial dishwasher will remain on during this
period and the current programme will not be interrupted. If one of
the components that is switched off is needed during the current
programme stage, the programme duration will simply increase for
the duration of the load cut-out.
The third line of the display will alert you to the peak load negotiation,
for example:
Universal
Temperature
Peak load cut-out
55 °C
To Next Page
Loading...
