Settings
61
Delay start
You can select whether Delay start appears in the Additional
functions menu or not.
Selecting No will remove Delay start from the Additional functions
menu for operators.
To be able to delay the start of a programme, Yes must be selected in
order for it to be displayed in Additional functions.
To set the start time see “Additional functions, Delay start”.
Select the Settings menu.
Select Delay start and confirm your choice with the OK button.
The following options are available:
- No
Delay start is switched off and therefore not visible as an additional
function.
- Yes
Delay start is switched on.
Select the option you want and confirm your choice with the OK
button.
To Next Page
Loading...
