Operation tips
18
System messages
The symbol indicates a system message. These messages provide
information about current processes and the status of the dish-
washer. System messages are displayed individually at the end of the
program. If there are multiple system messages, the additional mes-
sages can be displayed by pressing the OKbutton. A system mes-
sage can be accessed again during a program cycle by pressing OK.
Example:
Automatic switch-off
The dishwasher has an automatic switch-off function. The dish-
washer switches itself off automatically once the set time has expired.
The display and all other LEDs are switched off. To switch the dish-
washer on press the (On/Off) button.
The automatic switch-off function can be disabled (see "Additional
settings, Switch off after"). The display will then remain active in
standby mode.
To Next Page
Loading...
