Miele PG 8061 - Water Hardness; Display View

Additional settings
90
Water hardness
Using this menu, you can program the water softener to match the
hardness of the water supplied.
Detailed information is available under "Filling the salt compartment".
Display view
During a program, the actual or set temperature can be shown in the
second line of the display.
 Select the Additional settings menu.
Display view
Actual temperature
Required temperature
(
 Select Display view and open the corresponding menu by pressing
the OKbutton.
The following settings are available:
– Actual temperature
Displays the actual temperature during a program (this value will
vary over the course of the program).
– Required temperature
Display the set temperature for the main wash or the final rinse
phase.
(The maximum value is displayed as a static value. It will change
from one program stage to the next).
 Select the desired option and confirm your choice with the OKbut-
ton.