IMPORTANT SAFETY INSTRUCTIONS
8
Do not connect the dishwasher to the electrical supply by a multi-
ple outlet box or an extension cable since they do not guarantee the
required safety of the appliance (e.g. danger of overheating).
Do not open the commercial dishwasher casing under any circum-
stances. Tampering with electrical connections or components and
mechanical parts is highly dangerous to the user and can cause oper-
ational faults.
The commercial dishwasher must not be used if the connecting
cable is damaged. If the cable is damaged, it must be replaced with a
special connecting cable available from Miele. For safety reasons, this
may only be performed by the Miele Service Department or an autho-
rized Miele Service dealer.
Before maintenance, disconnect the commercial dishwasher from
the electrical supply.
The plastic housing of the water connection contains electrical
components. It must not be dipped in water.
There are live wires in the water inlet hose. Do not shorten the wa-
ter inlet hose, even if it is too long.
The built-in waterproof system offers reliable protection against
water damage if the following conditions are met:
– proper installation
– proper maintenance of the dishwasher or exchange of parts in
case of visible damage
– closing of the water valve during longer absences (for example va-
cation)
The waterproof system will work even if the dishwasher is turned off.
However, the commercial dishwasher must remain connected to the
electrical supply.
To Next Page
Loading...
