Cleaning and care
98
Cleaning the flat
and micro-fine fil-
ters
Remove the coarse filter.
Grasp the micro-fine filter by the upper rim and turn it in the direc-
tion of the arrow to release it.
Then lift it out.
Remove the flat filter.
Rinse the filters thoroughly under running water. If necessary use a
soft washing-up brush to remove soiling.
Replace the filter combination in the reverse order, turning the micro-
fine filter to the left to re-engage it.
The flat filter must lie flat in the bottom of the wash cabinet.
The spray arms will get blocked if the filters are not replaced cor-
rectly.
To Next Page
Loading...
