~
This machine must only be connected to the on-site water supply
using a new hose kit. Old hoses must not be re-used. Check the
hose regularly for signs of wear. Change in good time to avoid the
risk of leaks and subsequent damage.
~
Faulty components must only be replaced by genuine Miele
original spare parts. Only when these parts are fitted can the safety
standards of the machine be guaranteed.
~
Do not connect the machine to the mains electricity supply by an
extension lead or a multi-socket unit. These do not guarantee the
required safety of the machine (e.g. danger or overheating).
~
If this machine is being used in a commercial environment,
please ensure that all relevant health and safety regulations are
obeyed.
~
This washing machine must not be installed and operated in
mobile installations (e.g. on a ship).
~
Please refer to the information in "Installation and connection" and
"Technical data".
~
The accesibility of the plug must be always ensured in order to
separate the washing machine from the mains.
~
If the washing machine is hard-wired, the isolation switch must
always be accessible to disconnect the washing machine from the
mains.
Warning and Safety instructions
9
To Next Page
