Programming
122
Programme structure
Programme header
Programme number, Programme name, Material number, Area
1-2-3, Name - area 1-2-3, Weigh, Nominal load, Min. water level, Fill
type, Access mode, Lock, Peak load, Hot water control, Price
Area 1
Pre-wash
Pre-wash 1 to Pre-wash 10 (max. 10 blocks)
Area 2
Main wash
Main wash 1 to Main wash 10 (max. 10 blocks)
Area 3
Rinse
Rinse 1 to Rinse 10 (max. 10 blocks)
A programme consists of a Programme header, a Pre-wash area, a
Main wash area and a Rinse area. These areas can form the
programme individually or combined, but areas cannot occur twice.
The areas consist of individual blocks.
General programme structures, which apply to the whole programme
are configured in the programme header. See menu option "Create".
The blocks are identical for each individual area and all have the
same basic parameter settings.
The easiest way to create a new programme is to copy blocks or
areas of an existing programme or a whole programme, and then to
change it.
To Next Page
Loading...
Need help?
General
