Programming
170
Select one of the languages available in the controls using the
multifunction selector.
The following will then appear in the display during data transfer:
If there was already language data on the card, the security question
will appear.
LanguageData to card
Overwrite existing data?
Press the "Save" button to overwrite the existing data.
Useful tip: When the button is pressed, or if after 30seconds no
button has been pressed, overwriting is not carried out and the
display returns to the previous menu.
Data to control
unit
With this menu option available control data (language, dispensing
data, programmes or settings) can be copied from the card to the
controls.
Call up the "Data to control unit" option in the Main menu.
Supervisor level
Main menu
Delete data from card
Data to control unit
You have the following options:
– Data to card
– Data to control unit
– Deleting a card
Select "Data to control unit".
When "START" is pressed the following appears in the display,
depending on the data content of the card:
Language
If there is a language on the card, the following appears:
Overwrite language
Data to control unit
Language on card
english (GB):
Language
: english (GB)
To Next Page
Loading...
Need help?
General
